Welcome To BCFasteners Blog
Monday, June 9, 2008

The world of fasteners and brads does not belong to nailers alone, there is a whole line of power staplers out there made to get the job done. Well built sturdy staplers are available that can do task from roofing applications to helping install your hardwood floor. Buying a power stapler requires the same amount of investigation as purchasing a pneumatic nailer. You must match each project you are working on with the correct piece of equipment to ensure that you are going to be able to complete the job correctly. Just like with pneumatic nailers, you have to be sure that you are using a stapler with enough power to complete the job. You also must be sure that the stapler uses staples that are the right fit for the material you are using.


by: BCFasteners

Friday, May 2, 2008

Paslode has been around since the 1930's and they were the first company to invent the pneumatic fastening tool. Through their innovative design they were able to become an industry leader and they have stayed at the vanguard of the pneumatic industry by keeping up with technology and improving design and functionality. They have designed a user friendly tool and are making it a point to keep doing so. Paslode was the first company to design and manufacture the cordless framing nailer in the 1980's and this again put them in the front running for fastening tools.

Paslode has now become a forerunner in the cordless fastener niche as well. Paslode was the first company to design and manufacture the cordless framing nailer in the 1980's and this again put them in the front running for fastening tools. Their cordless design uses a fuel cell and a battery combination to get the fuel into the combustion chamber as well as ignite the combustible mix of gas. This type of cordless application still gives their tools the power and the endurance to take the abuse of a full 8 hour day. Their design allows the tool to maintain a high level of performance without the user having to constantly change batteries. This is an added convenience that saves a huge amount of time.

Paslode manufactures and carries a full line of products for all fastener needs from small staples or brads all the way up to large framing nailers and concrete/steel fasteners. Paslode has products for the average handyman do it yourselfer at home all the way up to full fledged heavy duty construction workers. The Paslode name is equated with a quality product so whenever you are making the choice to use Paslode products you can be confident you are getting a durable piece of equipment.

With all of the innovations in the construction trade Paslode has made sure they keep up with the changing times and technology. With every passing year there are new tools that are invented to make construction trade workers and day to day handymen's projects easier. Paslode is making sure that they are continuing to not only keep up with this technology but to also stay in the forefront. The 1990's saw the emergence of some new products such as:the IM250 F finish nailer in 1991, the PowerMaster in 1995, and the Wood-to-Steel™ Fastening System in 1996.

With over 60 years in the business and a name that equals quality Paslode tools are a much sought after product. Considering they have done so well in the past and now in the present are holding strong it stands to reason that the future should hold the promise of the same quality to come.


by: BCFasteners

Monday, April 21, 2008

Paslode Cordless nailers are very versatile and handy tools that can be used in many applications from the home to the construction site. Unless you are an expert tradesman, sometimes knowing exactly what tool fits the job can be a little tough. What drill works best with which material? What nailer should I use to frame a wall or to assemble my tongue and groove flooring? There is a nailer tailored for just about any project you're are looking to do.

Cordless nailers have several benefits and can be helpful on various projects. Builders and or contractors may also choose to use a cordless nailer for the convenience it affords. The luxury of having a tool that is fast and easy to use is always a great benefit. Relying on a motor rather than an air compressor makes the cordless nailer easier to maneuver and much more portable. Their versatility is one of their greatest attributes. Being able to go from one job to the next and fitting into tight, hard to reach spots is very useful, whether you are doing a do-it-yourself project or a commercial job. Though cordless nailers can be slightly more expensive than other types of nailers the benefits of their versatility and convenience make it a worthwhile investment.

Cordless nailers can be used to fit into places that might not be as easy to get a regular pneumatic nailer into. If you have ever tried to secure cabinets to open framework or nail ceiling joists, than you know the difficulties you can face when using a traditional nailer. Some jobs require you using your nailer at hard to reach or awkward angles; this is where a cordless nailer can be very useful. With cordless nailers, you do not have to worry about depending on a compressor or having to carry it around while moving through your project area. This can also be an additional safety feature as you don't have to worry about cords getting caught on you or your other tools; or worry about you or other people tripping over cords.

You can find a cordless nailer to do any job that you could do with a conventional nailer. One can find cordless models in framing nailers, brad nailers, and even finishing nailers. A good quality cordless framing nailer can still hold the same or near capacity as the pneumatic nailer, and can be used for basic framing work or for tasks such as working on your deck or ordinary home repairs. While the pneumatic nailer is slighty faster than its cordless counterpart the convenience of not having to deal with a cord or compressor should make up for that time. One can only imagine how long normal framing or other household tasks took when using only a hammer and regular nails.


by: BCFasteners

Friday, April 18, 2008


Pneumatic Nailers Are Not Just For Contractors Anymore

There are a multitude of nailers on the market today, all with different purposes. Trying to decide which nailer to buy can be challenging enough, let alone the fact that the novice might not know exactly what to expect when using certain types of nailers. Previously it seemed that pneumatic nailers were only good when used for production woodworking projects; today that is not so. Today these tools are being used by an abundance of woodworkers on hobby like projects.

If you are a hobbyist looking to purchase a tool of this magnitude, you will need to ask yourself what size do I need to fit my project. If you are working on a small crafts project, you will need a nailer that can get into tight areas. A good choice would be brad nailer that uses 3/8" or longer brads. This would be 18 gauge or 19 gauge nailer. This nailer, because it is a small gauge will leave you with less splitting. You want to keep in mind that this type of pneumatic nailer will not have power to assemble larger work pieces.

If you are a cabinet maker or work with larger crafts, you will be choosing a different pneumatic nailer for your projects. In this case you will probably be working with a 16 gauge brad nailer. These nailers will shoot 5/8" to 2" nails and can typically handle heavier jobs than the 18 or 19 gauge nailers.

If you are a woodworker that works with a full range of crafts or projects, meaning you work with everything from small hobby projects to larger heavier items, you may need to purchase a different pneumatic nailer for each one. You may find yourself purchasing one pneumatic nailer for more detailed work and a larger nailer for larger projects like cabinetry and large crafts.

Another reason for choosing the correct nailer for each project is to try to reduce the presence of blowout. Blow out can occur when using a pneumatic nailer for several reasons. One reason may simply be that you are using a nailer that does not have enough driving power for the project you are doing. When there is not enough driving power there is a greater chance the brads will follow the grain of the wood and then experience blowout. Another cause of blowout may simply be because nailers have the inclination to follow the annular wood rings. This happens because the wood has softer areas amidst harder areas of wood. The nail or brad typically follows the softer areas of the wood and does not go through the tougher areas of wood, causing the nail to bend when attempting to go through the harder wood.

Take the time to know the differences in pneumatic nailer sizes and gauges. This will help you decide which nailer is best for you and your project. Whatever project you have, a pneumatic nailer can help simplify your project and leave you a project you can enjoy for years to come.


by: BCFasteners

Friday, October 26, 2007
Welcome to B&C Fasteners Inc.

We have been in the pneumatic tool business since 1968. We have over 225 years of combined service in the pneumatic tool and fastener business. We service and sell all major brands of air nailers and staplers.

Service is our most important product and we are always looking for better ways to serve you. When it comes to expert service B&C Fasteners delivers. We have been proving it for over 40 years.

We just don't make promises we deliver!


by: BCFasteners

Previous Posts
Archives
Get an instant 8% Discount for joining NOW!
Receive exclusive offers, discounts, and great deals

Home